[Mar-2026] Latest A10 Networks A10-System-Administration Certification Practice Test Questions
Verified A10-System-Administration Dumps Q&As - 1 Year Free & Quickly Updates
NEW QUESTION # 12
What is the purpose of a VRRP-A floating-IP address?
- A. To use as source IP address for VRRP-A hellos.
- B. To provide a single next hop IP address for uplink and downlink devices.
- C. To provide a single IP to manage all VRRP-A devices in the set.
- D. To serve as a tie-breaker when selecting a VRRP-A owner.
Answer: B
NEW QUESTION # 13
You upgraded the boot image and changed the boot pointer to the new image using bootimage command.
Which of the following operations will load the new image?
- A. shutdown -r
- B. reload
- C. system-reset
- D. reboot
- E. restart
- F. restore
Answer: D
NEW QUESTION # 14
In the following configuration:
Where network 3.0.0.x on each device is on a VE interface dedicated to aVCS traffic, what must you do to ensure that command "device-context x" always succeeds?
- A. Apply acl "permit 3.0.0.0 /24" on that interface for each device.
- B. Configure vcs floating-ip on network 3.0.0.0 /24.
- C. Verify the interface is untagged on each device.
- D. Enable management service ssh on that interface for each device.
Answer: B
NEW QUESTION # 15
Which VRID priority scheme will implement an Active-Active-Active VRRP-A deployment with three ACOS devices?
- A. 0
- B. 1
- C. 2
Answer: B
NEW QUESTION # 16
What information is typically submitted with every aXAPI call after the initial login is complete?
- A. Log file location
- B. The AXAPI special permission XML file
- C. The ACOS device serial number
- D. The programming language being used
- E. Authorization header with signature
Answer: E
NEW QUESTION # 17
Given the following "show vcs summary" output, which statements are true about the virtual chassis set?
(Choose three.)
- A. The command was run from the aVCS vMaster.
- B. The aVCS vMaster of the group can always be accessed at IP Address 1.0.0.1.
- C. This is aVCS set-id 1.
- D. The command was run from device 3 of the set.
- E. The aVCS vMaster of the set can always be accessed at IP Address 224.0.0.210.
- F. Three devices were configured as part of the virtual chassis.
Answer: C,D,F
NEW QUESTION # 18
Select two aXAPI implementation use cases. (Choose two.)
- A. Perform deep packet inspection on traffic and redirect and modify content.
- B. Auto-syncing the configurations via virtual chassis.
- C. Extract ACOS configurations or statistics from ACOS.
- D. Writing scripts to automate configuration changes.
Answer: C,D
NEW QUESTION # 19
Which statement describes the effect this command:
erase preserve-management
- A. The start-up config file is erased but the all of the admin accounts are preserved
- B. All configuration profiles, SSL certificates, aFlex polices, black/white lists, and system logs are erased the next time the system reboots
- C. The startup-config file is erased and the ACOS is immediately rebooted
- D. The startup-config file is erased but the management interface ip configuration is kept
Answer: D
NEW QUESTION # 20
How are aVCS changes that are performed on the vMaster pushed to the vBlades?
- A. aVCS reload has to be performed
- B. Automatically
- C. VRRP-A should be failed over
- D. HA Sync needs to be done
Answer: B
NEW QUESTION # 21
You are planning an Active-Active-Active VRRP-A three-device deployment that, upon failover of any device, distributes the load from a single device to both standby devices simultaneously. How many VRIDs are required?
- A. 0
- B. VRID Default is enough
- C. 1
- D. 2
- E. 3
- F. 4
Answer: D
NEW QUESTION # 22
Which three items does aXAPI require to configure an ACOS object (such as an SLB object)? (Choose three.)
- A. Endpoint with parameters
- B. Device's VIP URL
- C. Authorization signature
- D. Encrypted connection to device
- E. Device's serial number
- F. Device's management/data IP
Answer: C,D,F
NEW QUESTION # 23
Given the following VRID 2 configuration, which device will host the VRID after the three devices at the same time?
- A. The VRID will be hosted on all three devices at the same time.
- B. Device 3
- C. VCS will randomly assign the VRID to a device based on the uptime of the device.
- D. Device 2
- E. Device 1
Answer: E
NEW QUESTION # 24
......
Latest 2026 Realistic Verified A10-System-Administration Dumps - 100% Free A10-System-Administration Exam Dumps: https://passleader.torrentvalid.com/A10-System-Administration-valid-braindumps-torrent.html